Non-Domestic Natural Gas Catering

This Gas Safety Assessment is designed to test the gas safety competence of an operative in core commercial catering gas work by practical and knowledge and understanding assessment.

This Gas Safety Assessment comprises of 12 Core Competences:

1. Gas Safety Legislation
2. Gas Emergency Actions and Procedures
3. Characteristics of Combustion
4. Ventilation
5. Installation of Pipework and Fittings
6. Soundness Testing between Appliance Isolation Valve & Appliance Operating Taps for Pipework Volume up to 0.15m3
7. Checking and/or Setting Meter Regulators
8. Identification of Unsafe Situations and the Use of Emergency Isolation  Controls and Valves
9. Checking and Setting Appliance Burner Pressures
10. The Operation and Checking of Appliance Gas Safety Devices and Controls
11. Re-establish Existing Gas Supply and Relight Appliances

Range of appliances covered - All Commercial Catering Gas Fittings

Please also refer to CODC1 which carries the same authorisations as CCCN1, but is designed for Candidates holding Domestic Core or Non-Domestic Core qualifications.

Non-Domestic Catering Appliances, COMCAT 1 & 3, are automatically included in this course.

For course costs and to confirm course availability, please contact the office on 01698 828222.

Entry Qualification

Category 1 Candidates who wish to renew their CCCN1 qualification.

Category 1 Candidates who have allowed their qualification to lapse for more than 12 months and Category 2 Candidates may also access this course.

Experienced Gas Engineers who hold a current Domestic Core and/or Non-Domestic Core qualification who wish to obtain or renew CCCN1 should opt for the shorter CODC1 course.

As an alternative to CCCN1, Category 2 Candidates could complete CCN1 Domestic Core then progress to CODC1 Change-over Domestic Core to Commercial Catering Gas Safety.

Duration

• Training: 2 Days
• Assessment: 2 Days

Note:

Re-Assessment Domestic Core + Appliances costs cover up to 4 Appliances. If further appliances are to be renewed, a charge of £ 80 per appliance will be incurred.

Additional appliances (not previously held) will be charged at £ 145 each.

Registration Fees: In some instances registration fees will not be included.

Current rates: Domestic £65, Non- Domestic £85, Unvented Hot Water £40, LPG £45, OFTEC £45

All prices are subject to Vat @ 20 %

Please note that training is not a pre requisite to assessment

This Gas Safety Assessment is designed to test the gas safety competence of an operative intending to extend the work range from domestic natural gas appliances to include gas commercial catering appliances by practical and knowledge and understanding assessment.

This Changeover Gas Safety Assessment comprises of 3 Core Competences:

1. Ventilation and Combustion - Related to Commercial Catering Appliances
2. Installation of Pipework and Fittings for Commercial Catering Appliances
3. Soundness Testing between Appliance Isolation Valve & Appliance Operating Taps for Pipework Volumes up to 0.15m3

Range of appliances covered - All commercial catering gas fittings

Non-Domestic Catering Appliances, COMCAT 1 & 3 are automatically included in this course.

For course costs and to confirm course availability, please contact the office on 01698 828222.

Entry Qualification

Candidate must hold one of the following Core qualifications:

• CCN1
• COCN1

Duration

• Training:    1½ Days
• Assessment:    1½ Days

Note:

Re-Assessment Domestic Core + Appliances costs cover up to 4 Appliances. If further appliances are to be renewed, a charge of £ 80 per appliance will be incurred.

Additional appliances (not previously held) will be charged at £ 145 each.

Registration Fees: In some instances registration fees will not be included.

Current rates: Domestic £65, Non- Domestic £85, Unvented Hot Water £40, LPG £45, OFTEC £45

All prices are subject to Vat @ 20 %

Please note that training is not a pre requisite to assessment

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of install, exchange, disconnect, service, repair, breakdown and commission commercial gas catering appliances in Table 1 & Table 3 grouping by practical and knowledge and understanding assessment.

Range of appliances covered - 

COMCAT1 (Table 1) – Open and Solid Top Range Appliances covered – Boiling Burners, Stockpot Stoves, Hotplates, Warming Ovens, Bain Marie Hot Cupboards, Combination Ovens, Forced & Natural Convection, Direct & Semi-Indirect Ovens, Boiling Pans Direct/Indirect, Bulk Liquid and Jacketed Urns, Expansion Type Water Boilers, Gas Fired Dishwashers, Gas Heated Rinsing Sinks

COMCAT3 (Table 3) – Deep Fat and Pressure Fryers Appliances covered – Bratt Pans, Griddles, Grills, Salamanders, Simulated Charcoal, Over/Under fired.

Entry Qualification

Candidate must hold one of the following Core qualifications:

• CODC1
• CCCN1

Duration

• Training:    Incorporated in with CODC1 and CCCN1
• Assessment:    Incorporated in with CODC1 and CCCN1

Note:

Re-Assessment Domestic Core + Appliances costs cover up to 4 Appliances. If further appliances are to be renewed, a charge of £ 80 per appliance will be incurred.

Additional appliances (not previously held) will be charged at £ 145 each.

Registration Fees: In some instances registration fees will not be included.

Current rates: Domestic £65, Non- Domestic £85, Unvented Hot Water £40, LPG £45, OFTEC £45

All prices are subject to Vat @ 20 %

Please note that training is not a pre requisite to assessment